Verizon NSQ412 - Manual (Page 42)

NSQ412 Four-Line Caller ID Telephone Owner’s Manual 39
The following list explains the keys that are used during programming:
Keys to use Programming function
[PROGRAM] Enter the programming operation
[JOG] knob Scroll among the programming items or values
NAVIGATION [<] Return to the previous programming level or perform a back-
space while editing
NAVIGATION [>] Enter the next lower programming level
[REMOVE] Remove the current setting and return to the default value
[SAVE] Save the current setting
[RELEASE] Quit the programming operation
Press the [PROGRAM] key while the
extension is idle to start the program-
ming mode. The LCD will display:
Rotate the [JOG] knob repeatedly until
the display shows the programming item
to be set. Follow the display prompts to
select the setting needed. A single beep
is heard if programming succeeds. A
double beep is heard if programming
fails.
If no key is pressed in approximately
twenty seconds, the programming opera-
tion will be automatically canceled.
NOTE: Programming will automatically
disable after 120 seconds while setting
the Time/Date. Any programming
changes not entered with the [SAVE] key
will be lost.
Language Programming
The LCD prompts can display in English
or Spanish. To program the Language,
enter the programming mode and turn
the [JOG] knob until the display shows
LANGUAGE. The LCD will display:
Press the NAVIGATION [>] key to enter
the Language setup mode. Rotate the
[JOG] knob to select English or Spanish.
The LCD will display:
or
P R O G R A M
T u r n D i a l
L A N G U A G E
T u r n D i a l
> :
e n t e r
L A N G U A G E
= E n g l i s h
T u r n D i a l
S A V E : s a v e ?