Vizio CCU-11B - Manual (Page 5)

4 INITIAL CCU-11B SET UP
Make sure that you have turned off the AC power switch.
Remove the CCU card from the card rack of exchange.
Set mini-jumper on the CCU card to "BATT. ON" position.
Set function selection DIP switches (SW-A & SW-B) on the CCU card for
required functions.
Insert the CCU card into the card rack of exchange, and make necessary
connection correctly.
Turn on the AC power switch of exchange.
Turn on PROGRAM switch on the CCU card.
No
First installation?
Yes
Initial set
Is all programming data required to be cleared?
No
Yes
Dial operation from station #11
Confirmation tone
Touch ten times
Is Continuously Called Station necessary?
Yes
To Continuous Calling Tone
No
Is Secretary Transfer necessary?
Yes
No
To Secretary Transfer
Is Master/Sub-station necessary?
Yes
To Master/Sub-station
Is Executive Priority necessary?
Yes
To Executive Priority
Dial operation from station #11.
Touch Key.
Turn off PROGRAM switch on the CCU card of exchange.
Station #11 returns to an ordinary station.
— 4 —