08 maintenance and specifications – Volvo S60 User Manual
Page 318
08 Maintenance and specifications
Battery
08
318
•
After a new battery has been installed (see
the following section), reinstall the rally bar
in the reverse order.
NOTE
When reinstalling the rally bar, tighten the
screws to 22 ft lbs (30 Nm).
Installation
1.
Lower the battery into the battery box.
2.
Move the battery inward and to the side
until it reaches the rear edge of the box.
3.
Tighten the clamp that secures the battery.
4.
Connect the ventilation hose.
> Be sure that it is correctly connected to
the battery and the vent in the vehicle's
body.
5.
Connect the red positive cable.
6.
Connect the black negative cable.
7.
Press in the rear cover. (See Removal).
8.
Reinstall the molding. (See Removal).
9.
Reinstall the front cover and secure it with
the clips. (See Removal).