VIEWSONIC WPCC100 - Manual (Page 13)

10 ViewSonic Wireless PC Card Adapter
The Wireless Network Connection screen displays.
2 In the Available wireless networks list, click the network
name (SSID) that you want to join.
• If you selected an SSID without a network key (WEP or
WPA) associated with it, click Allow me to connect to
the selected wireless network, even though it is not
secure, then click Connect. See the Wireless Network
Connection screen shown on the previous page.
• If you selected an SSID with a network key, enter it in
the Network key field, re-enter it in the Confirm
network key field, un-check Enable IEEE 802.1x
authentication for this network, then click Connect.
See the Wireless Network Connection screen shown
on the next page.
• IMPORTANT: Be sure to un-check Enable IEEE 802.1x
authentication for this network.
An access point
(SSID) that does
not have a network
key (WEP or WPA)
PC Card UG.book Page 10 Friday, July 23, 2004 2:39 PM