VocoPro GIG-STAR - Manual (Page 30)

Check the source player input channel and
ensure the input selector is set to that channel.
If external speakers are connected, set the
speaker selector to EXT. If no external
speakers are connected, select INT.
Check overall cabling and viability of external
equipment.
Plug the power cord from the GIG STAR to a
wall outlet.
Use an external RF Modulator.
Increase space between microphone and
speakers.
Turn down microphone or guitar volume.
Lower the treble levels.
Try other MP3/JPEG encoding software or disc
writing software for writing the discs.
Plug the AM and FM antennas in and position
them in an open area with little to no physical
obstacles.
The input selector is not set to the channel
that the active source player is connected
to.
The speaker selector is not set correctly.
Faulty connection within external
components or external component failure.
The power cord to the GIG STAR is not
plugged in.
Your TV does not have RCA style A/V input
jacks.
An open microphone or guitar is too close to
the output speakers.
Microphone or guitar volume is too high.
Excessive treble is applied.
The MP3/Photo-CD either has files that are
not standard-formatted, or the disc was not
standard-copied.
The antennas are not plugged in or they are
postitioned in a way that blocks the radio
frequency.
No audio output.
Unable to connect the GIG STAR to
my television monitor with the RCA
cable provided
There is a loud "squealing" noise
coming from the speakers.
An MP3 or Photo-CD does not play in
the GIG STAR.
The radio is not getting any signal or
the sound is very unclear.
Troubleshooting
24