Vivitar Tripod/Video Equipment - Manual (Page 48)

EN-48
Step Procedure Figure
3
4
5
Use W or X to select the image you want to print, then press T to go to
more detailed settings.
* The [Print Info] screen is displayed.
Use S or T to select your preference, then press the button.
* After the print settings finished, the printer icon will be displayed as
shown in the figure of step 5.
[Quantity] :
Specifies the number of prints. You can select the number
up to 10.
[Date]: If you select With, images are printed with the date.
[File Name]: If you select With, images are printed with the file name.
[Cancel]: To cancel the print settings, use S or T to select [Cancel].
After step 4 is completed, you can still use W or X to select other images.
Follow the same instructions and print settings as in step 4, then press the
button to print.
Select :
Cancel :
Print : OK
Set :
10
Date
Print Info
Select : Set : OK
File Name
Cancel
With
With
Quantity
Select :
Cancel :
Print : OK
Set :
100-0001
Use S or T to access in the selection of paper setting, then press the
button to confirm.
[Size]:
You may select the desired item depending on the
type of printer being used.
[Borderless]: You may select the desired item depending on
the type of printer being used.
[Cancel]: To cancel the setting, use S or T to select [Cancel].
Standard Size
Borderless Standard
Print Paper
Select : Set : OK
Cancel
2