Visioneer STROBE 500 - Manual (Page 61)

54 V ISIONEER S TROBE 500 S CANNER U SER ’ S G UIDE
C
ONFIGURE
B
EFORE
S
CAN
Choosing Configure Before Scan simply opens either the TWAIN or WIA
scanning interface when you press or click a button. You can then use the
interface to change the color mode, resolution, page size, and other settings.
When you scan, the scanned image will still be sent as the file type and to
the same Destination Application already selected in the OneTouch
Properties window for that button.
T
O SET
C
ONFIGURE
B
EFORE
S
CAN
1. Open the OneTouch Properties window.
2. Using the button selection arrows, choose the button that you want to
set to configure before scanning.
3. Select the scan configuration Configure Before Scan.
4. Right-click on Configure Before Scan and choose an interface to use
for configuring before scanning.
TWAIN—The TWAIN Interface opens for you to make changes prior
to scanning. Please see “Scanning from TWAIN” on page 83 for
detailed instructions about scanning with the TWAIN Interface.
WIA—The Windows Image Acquisition (WIA) Interface opens for
you to make changes prior to scanning. Please see “Scanning from
WIA” on page 89 for detailed instructions about scanning with the
WIA Interface.
Click the arrows to
select the button.
Select Configure
Before Scan.
Right-click on Configure
Before Scan to get the
menu, and choose the in-
terface to use for scanning.