Viewsonic system recovery dvd/hdd partition, Running the recovery dvd – VIEWSONIC NETBOOK VS12946 User Manual

Page 23

Advertising
background image

ViewSonic

VNB130/VNB140

10

Viewsonic System Recovery DVD/HDD Partition

Your computer supports system recovery to allow you to restore the system to its default fac-
tory settings.

You can run the Recovery DVD, or recover the system from the hard disk partition, if you:

1. Have a system or hardware failure.
2. Need to restore the system to factory settings.
3. Have forgotten the system password.

Running the Recovery DVD

You will need to attach a DVD drive to the computer in order to access the Recovery DVD.

1. Make sure an external USB DVD drive is attached to the computer.
2. Start-up your notebook computer and press <F2> to enter the BIOS.
3. Use the arrow keys to go to the Boot menu.
4. Set the CD/DVD-ROM Drive (make sure the Recovery DVD is inserted) as the first device in the boot

order from the Boot menu (use the up/down arrow keys to select the device, and then use the “+” or “-
keys to move the device up and down the order).

5. Select Exit Saving Changes from the Exit menu (or press F10) and press Enter to exit the BIOS and

reboot the computer.

6. Make sure the Recovery DVD is inserted into the external USB DVD drive.
7. As the computer boots up press a key when you see the message “Press any key to boot from CD or

DVD”.

8. Click RECOVERY TO FACTORY DEFAULT (button) when the Recovery System message appears.
9. You will then receive a Final Confirmation warning to make sure you are aware that all the partitions and

data will be removed (if you need to back up data/partitions then click No to exit and back up any data
before running the Recovery DVD again).

10. If you are sure you want to delete all data and partitions then click Yes.
11. The tools will load and the recovery process will then begin (note that the keyboard and mouse will be

temporarily locked during the recovery process).



Data Backup

Note that system

recovery will delete

all hard disk

partitions, and any

data contained

therein. Therefore

ensure you backup

all data from any

created partitions

before running the

system recovery

DVD.

Advertising
This manual is related to the following products: