Operations – VocoPro KJ-7808RV User Manual
Page 19
17
KJ-7808 RV (REAR PANEL)
KJ-7808 RV (FRONT PANEL)
Operations
Assigning Digital Key Control to MIC and STEREO Channels
You can assign the Key Control to any channel you desire.
To ASSIGN, you simply press the KEY button located to
the right of the fader on each channel you want the key
changes to be applied to (both MIC and STEREO inputs) and
the key changes will take immediate effect. To REMOVE a
key change from a channel, simply depress the KEY button
from that channel, and it is removed.
Remote Key Controlling of assigned STEREO and MIC inputs
It is also possible to control the input key of assigned channels with a
REMOTE KEY CONTROL Microphone. Connect the 1/4” cable to a MIC
input, and insert its 1/8” plug into the REMOTE KEY CONTROL jack. Use
the device’s Key Control buttons to modify the key.
OFF
ON
Note: Key changes made
from a remote key control
microphone are not exclusive
to that mic channel