Vivitek DVR5612 - Manual (Page 44)

4
Power LED Lamp LED
/+
-%.5 ).054 0/7%2

ß 6/,  
#(
 
!$*534
 
!$*534 %8)4
,!-0
34!453
Normal Operation
States Power LED Lamp LED Status Description
AC off Not lit Not lit AC power not connected
Standby mode Orange Not lit AC power is connected and your RPTV is in
standby mode.
Warm-up/Cool down Blue Flashing AC power is connected and the power button has
just been turned on or off.
Operation mode Blue Not lit AC power is connected, the power button has
been pressed, and the lamp has warmed up
Error Codes
States Power LED Lamp LED Status Description
21 Flashes blue twice,
then orange once
Not lit One of the cooling fans has failed. Call Service
Center to help you solve the question.
32 Flashes blue three
times, then orange
twice.
Flashing Lamp trouble or failure. Your RPTV automatically
shut down and restart itself. If this does not solve
the problem, Call Service Center to help you solve
the question.
52 Flashes blue five
times, then orange
twice.
Flashing Hardware error. Shut off your RPTV, wait one
minute, then restart your RPTV. If this does not
solve the problem,Call Service Center to help you
solve the question.
13
LED Status
There are two status LEDs on the front of your Micro Chip
Display Projection RP TV.
You may obtain the display’s related status through the LED
in the front panel. Their meanings are explained as follows: