Installation instructions, Location, Tools needed – Whirlpool ACD052PK0 User Manual

Page 9: Parts supplied, Warning, Tools needed parts supplied, Important: read and save these instructions

Advertising
background image

9

electric drill and
3/32" or smaller bit

Tools needed

Parts supplied

Installation Instructions

Important:
Read and save these
instructions.

Important:
Installer: Leave Installation Instructions with the

homeowner.

Homeowner: Keep Installation Instructions for future

reference.

Save Installation Instructions for local electrical

inspector‘s use.

22” - 36”

(55.9 cm - 91.4 cm)

14” (35.6 cm)

Window opening
measurements

Important: Observe all governing codes and
ordinances.

Check location where air conditioner will be installed.
Proper installation is your responsibility. Make sure you
have everything necessary for correct installation.

The location should provide:

Grounded electrical outlet within four feet (122 cm)

of the window or through-the-wall location. Do not use
an extension cord.

Free movement of air to rooms to be cooled.

• A large enough opening for the air conditioner.

22" (55.9 cm) minimum to 36" (91.4 cm) maximum
opening width
14" (35.6 cm) minimum opening height

Adequate wall support for weight of air conditioner.

Air conditioner weighs between 90 and 178 pounds
(40.8 to 80.7 kg).

Do not install the air conditioner in an area where
the front panel will be exposed to heat sources that will
raise the panel surface temperature above 120°F
(50°C).

WARNING

!

Excessive Weight Hazard

Use two or more people to move and install air
conditioner.
Failure to do so can result in back or other injury.

flat-blade and
Phillips
screwdrivers

level

gloves

utility knife

safety
glasses

tape measure

Location

short
screw

wood
screw

L bracket

seal strip

sash seal

guide
panel

Advertising