Zanussi ZBC 402 B/W - Manual (Page 4)

4
SPECIFICATIONS
Dimensions: ZBC 402 B/W
Length 572 mm
Width 502 mm
Height 49 mm
Cut Out dimensions
Length 560 mm
Width 490 mm
Voltage 240 V ~ 50 Hz
Total Power 5.9 kW
1) Halogen Cooking Zone ∅ 180 mm 1800 W
2) Cooking Zone 120/180 mm 1700 W
(doubel circuit)
3) Cooking Zone ∅ 145 mm 1200 W
4) Halogen Cooking Zone ∅ 145 mm 1200 W
5) Residual Heat Indicator
Rating plates:
Typ 084.0 ZBC 402 W Prod.No. 941 591 662
Instr. No. Ser.No. 5.9 kW
ZANUSSI 240 V ~ 50 Hz
SWISS MADE
Typ 084.0 ZBC 402 B Prod.No. 941 591 663
Instr. No. Ser.No. 5.9 kW
ZANUSSI 240 V ~ 50 Hz
SWISS MADE
INSTALLATION
Fig.1
H
H
2 3
1 5 4
Unpacking
Please examine the appliance for any damage sustained
during transportation!
If the appliance is damaged please inform the installer or
retailer immediately, before the appliance is connec-ted.
The packing material should be disposed of properly.
Before using your hob
Clean your ceramic hob thouroughly before its first use.
Ceramic hobs are treated and cleaned the same way as
glass. When you use the ceramic hob for the first time
it can give off a smell for a short time as the manufacturing
deposits burn off.
This Zanussi hob may be installed into any kitchen
worktop with a depth of 600 mm or more. The worktop
must be constructed of material resistant to 100°C.
The cut out in the worktop should be to the dimensions
shown in fig.1. Before making the cut out ensure that the
edges of the hob, that are to be adjacent to either a side
or rear wall, have a minimum distance of 55 mm between
the edge of the hob and the wall (fig.5).