Yamaha DVR-S150 - Manual (Page 72)

67
AD
V
ANCED CONFIGURA
TION
You can configure the parameters for Dolby Pro Logic II Music to fine-tune the sound field effect.
1
Carry out the “Enjoying 2ch sources with all
speakers (Dolby Pro Logic II)” procedure
(page 58) and select “PL II Music”.
2
Press or to select “PANORAMA”,
“DIM.” or “CT WIDTH”.
For details on each parameter, refer to “About the
Dolby Pro Logic II Music parameters” below.
3
Press or to configure the parameter.
4
To configure other parameters, repeat steps
2 and 3.
■ About the Dolby Pro Logic II Music
parameters
PANORAMA
Gives front L/R channel sound a wraparound effect,
distributed throughout the entire surround sound field, for
an expansive feeling.
Function: Expands the front sound field of Dolby Pro
Logic II.
Selection item: OFF/ON
Default setting: OFF
DIM. (Dimension)
Adjusts the difference in volume between front and
surround channels to the volume balance you desire.
Function: Adjusts the difference between front surround
sound field and surround volume.
Variable range: –3 (stronger toward the surround
direction) to +3 (stronger toward the front direction)
Default setting: STD (Standard)
CT WIDTH
Distributes the center channel sound to the left and right.
Function: Expands audio from the front sound field to
the left and right.
Variable range: 0 to 7
If set to 0 center channel sound will only output from the
center speaker. As the value rises center channel sound is
incrementally distributed to the L/R speakers. When set to
7, sound will only output from the L/R speakers.
Default setting: 3
Configuring Dolby Pro Logic II Music Settings
TV
CH
CINEMA
CH
POWER
AUDIO
SELECT
NIGHT SW
TV CH
TV INPUT
SLEEP
PRESET PRESET
A B C D E
CENTER SURR
SHIFT
STEREO MATRIX 6.1
A-B REPEAT
ANGLE SUBTITLE
ON SCREEN MENU
TEST
RETURN STATUS
TV VOL VOLUME
MUTE
AMP
DVD/CD VCR VIDEO
TUNER
MOVIE MUSIC SPORTS GAME
ENTER
YPAO
ON/OFF
STANDBY/ON
START PTY SEEK MODE
SURROUND
SET MENU
START
FREQ/RDS