Correct tilt positioning for tilt-in-space, Legrest operation for tilt-in-space – Lumex Syatems ORTHO-BIOTIC PREFERRED CARE 565DG User Manual

Page 10

Advertising
background image

565DG/565TG Ortho-Biotic Preferred Care

®

Recliners Operating Instructions

10

Figure 16

CORRECT TILT POSITIONING

FOR TILT-IN-SPACE

NOTE: The Tilt chair is attendant operated only.

For chair to operate properly, a person
must be in the chair.

To tilt the chair back:
1. Stand behind the chair, and locate the release

lever under the push handle.

2. Squeeze the lever while pushing down on the

back. Once the desired position is attained,

release the lever to lock into position

(See fig. 16).

To bring the chair up:
1. Stand behind the chair, and locate the release

lever under the push handle.

2. Squeeze the release lever and lift the back up.

Once the desired position is attained, release

the lever to lock into position (See fig. 16).

Release Lever

Under Cusion

Push Handle

Up Position

Legrest Down

Legrest Up

LEGREST OPERATION

FOR TILT-IN-SPACE

To lift legrest:
Step on the front of the foot pedal, located on the

side of the chair, until it locks in place (See fig. 16).

To lower legrest:
Step on the back of the foot pedal.

Note: The legrest is easier to operate when the

chair is in its fully tilted position, however
legrest will operate in any position of tilt.

Advertising
This manual is related to the following products: