Yamaha CDC-675 - Manual (Page 12)

12
CDC-675 only
Adjusting the level of signals output into an
amplifier, etc.
You can adjust the level of sound signals output from the LINE
OUT terminals on the rear panel into an amplifier, etc. as you
prefer by using the OUTPUT LEVEL buttons.
For optimum sound quality
* When the DIGITAL AUDIO OUT (OPTICAL) terminal is used
for the connection, set the level of output signals to max.
* The level of output signals can be checked in the display.
CDC-675 only
When you listen with headphones
Connect the headphones to the PHONES jack and adjust the
volume by using the OUTPUT LEVEL buttons.
* Note that the use of the OUTPUT LEVEL buttons will also
vary the level of the signal output to an amplifier, etc.
OUTPUT LEVEL
+ –
Changing brightness of the display
OUTPUT LEVEL – +
or
(On the front panel)
If desired, you can change brightness of the display
in three degrees by pressing the DIMMER button. Normal illumination
Slightly dim
Dim
DIMMER
PHONES