Ideal ND-7609-3UK - Manual (Page 8)

#ThermalVision™ PRO SW
ND-7609-3UK Page 8 of 21
4. Interpolation. To change the interpolation click on the arrow button.
x 1 (320X240) x 2 (640 x 480)
5. Zoom factor. To change the zoom setting click on the arrow button. The
following four settings are available X1, X2, X3, X4
(examples of X1, X2 and X4 shown below).
x1 Zoom X3 Zoom X4 Zoom
When zoomed to x2 or more, the part of the image diplayed can be selected by
means of the mouse in the Pan Control box.
6. Area Select. Use the arrow button to select a small, medium, or large area for
measurement (see page 14).
7. Image alignment. This allows the vertical and horizontal alignment of the
thermal and visible images. Clicking on the navigation arrows will move the
visible image while the infrared image remains stationary. It is easiest to adjust
with a 50% thermal and 50% visible image.
Note: Clicking on the reset button returns the alignment to the setting when the file
was opened.