AT&T RELEASE 2 User Manual
Page 60
AC Outlet Check
Check, or have checked by a qualified electrician, the outlet into which your
MERLIN Plus system control unit will be plugged. Check that the hot,
neutral, and ground wires are properly connected to the outlet by using an
IDEAL EZ Check
®
circuit tester (IDEAL Industries, Inc., model 61035) or
equivalent circuit tester.
The outlet can also be tested using a voltmeter by taking the measurements
shown in Figure 43.
FIGURE 43 Proper ac outlet measurements.
Mounting the Control Unit
The control unit is designed to be wall mounted 6 inches above the jack field
that is centered beneath it in two columns. See Figure 44. The slots at the
bottom of the control unit provide for simple, neat cord management.
58 Appendix B: Quick Reference Installation Requirements