Certification, Power requirements, Load impedance – Shure BETA 181 User Manual

Page 4

Advertising
background image

444444444

Accessories and Parts

Avoiding Pickup of Unwanted Sound Sources

Directional microphones are most sensitive to sounds arriving on axis and reject at angles depending upon the polar pattern. The following chart shows the rejection angles of each

microphone. In live performance or recording settings, align monitors, P.A. loudspeakers, and unwanted sound sources at these angles.
To minimize feedback and ensure optimum rejection of unwanted sound, always test microphone placement before a performance.

Cardioid

Supercardioid

Bidirectional

Off-axis null points at 180 degrees

Off-axis null points at 120 degrees

Off-axis null points at 90 degress

CERTIFICATION

Eligible to bear CE Marking. Conforms to European EMC

Directive 2004/108/EC. Meets Harmonized Standards

EN55103-1:1996 and EN55103-2:1996, for residential

(E1) and light industrial (E2) environments.
The Declaration of Conformity can be obtained from:
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Wannenacker Str. 28
D-74078 Heilbronn, Germany
Phone: +49 7131 72 14 0
Fax: +49 7131 72 14 14
Email: [email protected]

Power Requirements

This microphone requires phantom power and performs

best with a 48 Vdc supply (IEC-61938). However, it will

operate with slightly decreased headroom and sensitivity

with supplies as low as 11 Vdc.
Most modern mixers provide phantom power. You must

use a balanced microphone cable: XLR-to-XLR or

XLR-to-TRS.

Load Impedance

Maximum SPL capability, output clipping level, and dy-

namic range vary with the input load impedance of the

preamplifier to which you connect the microphone. Shure

recommends a minimum input load impedance of 1000

Ω. Most modern microphone preamplifiers meet this

requirement. Higher impedance results in better perfor-

mance for these specifications.

124,46 mm

(4.90 in.)

20,32 mm

(0.80 in.)

34,54 mm

(1.36 in.)

Furnished Accessories

Mic Clip

A57F

Zippered Carrying Case

A181C

Windscreen

A181WS

Optional Accessories

Cardioid Capsule

RPM181/C

Supercardioid Capsule

RPM181/S

Bidirectional Capsule

RPM181/BI

Omnidirectional Capsule

RPM181/O

Beta 181 Preamp

RPM181/PRE

Universal Microphone Mount

A75M

7.6 m (25 ft.) Cable

C25E

Note:

Information in this guide is subject to change

without notice. For the additional information about this

product, please visit www.shure.com.

Advertising
This manual is related to the following products: