SoundMax SM-CMD3008 User Manual

Page 19

Advertising
background image

19

STEREO button on the RC to switch stereo reception on/off. Improvement of reception of distant stations

can be done by selecting mono mode, which may cut down some reception noise.

Local radio station search

Press repeatedly SELECT button on the panel or SEL button on the RC until the display shows LOC ON (LOC

OFF). Press VOL+/VOL- buttons on the RC or rotate VOLUME regulator on the panel to select between LOC

ON/OFF. LOC ON means that only local stations are received; LOC OFF means that both local and distant

stations with weak and strong signal are received. Or press LOCAL button on the RC to switch between local

and distant station reception.

RDS function

RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not

available in you area, the following service is not available, either.

AF (Alternative Frequencies) function

Press AF button on the panel to turn the AF function on or off. When the function is on, AF symbol will blink

on the display.

When the radio signal strength is poor, enabling the AF function will allow the unit to automatically search

another station with the same PI (Program Identification) as the current station but with a stronger signal,

so that you do not have to retune the stations when driving between different transmitter coverage areas.

PS (Program Service name): the name of station will be display instead of frequency.

If RDS service is not available in your area, turn off the AF mode.

TA (Traffic Alarm) function

Press TA button to turn TA function on or off. When on, the TA symbol will show on the display.

In TA mode traffic program will be automatically searched, until the program is received. When traffic

announcement is received the unit will temporarily switch to the tuner mode (regardless of the current

mode) and begin broadcasting the announcement. After the traffic announcement is over, it will return to

the previous mode and volume level. To interrupt traffic announcement press TA button shortly; it will not

switch off the TA mode.

Advertising