JVC NX-PB10 - Manual (Page 10)

10
Searching for stations
1
Press FM/AUDIO IN repeatedly to select
“FM” as the source.
2
Start searching.
The station search stops when a station of sufficient
signal strength is found.
• To manually stop the search, press or .
• When you press or repeatedly, the frequency
changes step by step.
Improving the reception
If an FM stereo broadcast is hard to listen to, you can
improve the reception by switching to monaural mode.
• When the monaural mode (FM MONO) is activated, the
reception is improved. However, the stereo effect is lost.
• To restore stereo reception, press FM/AUDIO IN
repeatedly to select “FM.”
– The ST indicator lights up when receiving stereo
broadcast.
Presetting stations
You can preset up to 20 FM stations.
1
Show the preset number while listening
to a target station.
The preset number flashes.
2
Select a preset number.
3
Store the preset station.
Tuning in to a preset station
Receiving FM stations with Radio Data
System
Radio Data System allows FM stations to send an
additional signal along with their regular program signals.
• If you want to know more about Radio Data System, visit
<http://www.rds.org.uk>.
To display the Radio Data System information
* Displayed if related signals are not sent by a station.
PS (Program
Service)
Commonly known station names.
PTY (Program Type) Types of broadcast programs.
RT (Radio Text) Text messages the station sends.
FM radio
Playback operations
(Hold)
Frequency (No-radio Data System signal)
(Hold)
EN_NX-PB10[B].indb 10 EN_NX-PB10[B].indb 10 10.9.3 2:39:54 PM 10.9.3 2:39:54 PM