2 set-up, 3 docking and charging headset, 1 connecting usb adapter to pc – Plantronics Savi W430-M User Manual

Page 6: 2 connecting power supply to charger base

Advertising
background image

Plantronics Savi User Guide

6

2.3 Docking and charging headset

1

Gently push the headset into the charge cradle.
The charging indicator light on the charger base will flash
green to indicate that the headset battery is charging.

2

Charge for at least 20 minutes prior to the first use.

A full charge takes 3 hours. The indicator light will turn solid
green.

CHArging TiME

20 min .....................

Minimum charge
before first use

3 hours ...................

Full charge

Charging
Indicator Light

Note

The USB charging cable can also be used to charge the

headset. To successfully charge your headset with the USB cable
the PC must be on and in an active state (not standby). The
charging time will vary according to the number of other devices
drawing power from the PC’s USB port(s).

2 Set-up

2.1 Connecting USB adapter to PC

1

Insert the USB adapter into USB Port on PC. The indicator
light on the USB adapter will be solid red to indicate the USB
adapter is powered on and will turn solid green when it finds
the headset.

Note

The headset may have to be charged before the USB

adapter can find it.

2

the USB adapter can be folded as shown.

ImPortaNt Note

For best performance it is recommended

that Windows is updated with Service Pack levels listed below:

Microsoft Windows

®

XP Service Pack 3 (SP3) or later

Microsoft Windows Vista

®

Service Pack 1 (SP1) or later

2.2 Connecting power supply to charger

base

1

Connect the base power supply into the power jack on
the charger base.

2

Connect the power supply to the outlet. The charging

indicator light will be solid green

.

Advertising