Pch 5121, Chapter 2 unpacking, Warning – Acnodes PCH 5121 User Manual
Page 13
14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at
PCH 5121
12.1” industrial Panel PC
1000-nit Sun light readable screen
IP67 rated fully enclosure
CHAPTER 2 UNPACKING
WARNING:
When installing the PCH5121, make sure to:
ƒ
Turn the power off: Chance of electrocution. Turn off the monitor and unplug it from the power
supply.
ƒ
Only let certified engineers change the hardware settings: Incorrect settings can cause irrepa
rable damage to the product.
ƒ
Install the monitor with assistance: The product is very heavy and may be damaged by drops
and bumps. Two or more people should install the panel PC.
ƒ
Take anti-static precautions: Electrostatic discharge can destroy electrical components and
injure the user. Users must ground themselves using an anti-static wristband or similar device.
The installation steps below should be followed in order.
Step 1: Unpack the flat panel PC
Step 2: Check all the required parts are included
Step 3: Install the hard drive (optional)
Step 4: Install the CompactFlash® card (if not included)
Step 5: Mount the flat panel PC
Step 6: Connect peripheral devices to the bottom panel of the flat panel PC
Step 7: Connect the power cable
Step 8: Configure the system