Activeforever LogicMark Guardian Alert 911 Emergency Alert System User Manual
Page 13
but resetting this is simple.
What to do:
1. Press the “SET” button on the BASE UNIT until the red
“SETUP” light comes on. Release the SET button.
2. Now press and hold the PANIC BUTTON and the
BATTERY CHECK buttons together until the “setup”
light on the BASE UNIT turns off.
What to expect:
The red light will go out on the BASE UNIT. This indicates
the PENDANT and the BASE UNIT are synchronized. At
this point, everything should be working fine.
Information The FCC Wants You To Know:
FCC ID: TYD30911
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
Privacy of communications may not be ensured when using
this phone.
Operating Range:
The operating range of your Guardian Alert 911 will depend on many factors
including intervening walls, electrical interference or various appliances
such as vacuum cleaners, microwave ovens, mixers, coffee grinders, hair
dryers and other sources of electrical noise around the house.