Updating the software, Device care, Cleaning the device – Garmin quatix User Manual

Page 16: Specifications, Battery information, Data management, File types, Deleting files, Disconnecting the usb cable, Data fields

Advertising
background image

2

Select Setup > About.

Updating the Software

NOTE: Updating the software does not erase any of your data

or settings.

1

Connect your device to a computer using the USB cable.

2

Go to

www.garmin.com/products/webupdater

.

3

Follow the on-screen instructions.

Device Care

NOTICE

Do not use a sharp object to clean the device.
Avoid chemical cleaners, solvents, and insect repellents that

can damage plastic components and finishes.
Thoroughly rinse the device with fresh water after exposure to

chlorine, salt water, sunscreen, cosmetics, alcohol, or other

harsh chemicals. Prolonged exposure to these substances can

damage the case.
Avoid pressing the keys under water.
Avoid extreme shock and harsh treatment, because it can

degrade the life of the product.
Do not store the device where prolonged exposure to extreme

temperatures can occur, because it can cause permanent

damage.

Cleaning the Device

1

Wipe the device with a cloth dampened with a mild detergent

solution.

2

Wipe it dry.

Specifications

Battery type

500 mAh Lithium-ion battery

Battery life

Up to 6 weeks

Water resistance

Water resistant to 164 ft. (50 m)
NOTE: The watch is designed for surface
swimming.

Operating
temperature range

From -4ºF to 122ºF (from -20ºC to 50ºC)

Radio frequency/
protocol

2.4 GHz ANT+ wireless communications
protocol
Bluetooth® Smart device

Battery Information

The actual battery life depends on how much you use GPS,

device sensors, optional wireless sensors, and the backlight.

Battery Life

Mode

16 hours

Normal GPS mode

25 hours

NMEA 2000 streaming, GPS off

Up to 2 weeks

Always On sensor mode

Up to 6 weeks

Watch mode

Data Management

NOTE: The device is not compatible with Windows 95, 98, Me,

Windows NT®, and Mac OS 10.3 and earlier.

File Types

The device supports these file types.
• Files from HomePort. Go to

www.garmin.com/trip_planning

.

• GPI custom POI files from the Garmin POI Loader. Go to

www.garmin.com/products/poiloader

.

• GPX track files.
• GPX geocache files. Go to

www.opencaching.com

.

Deleting Files

NOTICE

If you do not know the purpose of a file, do not delete it. Your

device memory contains important system files that should not

be deleted.

1

Open the Garmin drive or volume.

2

If necessary, open a folder or volume.

3

Select a file.

4

Press the Delete key on your keyboard.

Disconnecting the USB Cable

If your device is connected to your computer as a removable

drive or volume, you must safely disconnect your device from

your computer to avoid data loss. If your device is connected to

your Windows computer as a portable device, it is not

necessary to safely disconnect.

1

Complete an action:
• For Windows computers, select the Safely Remove

Hardware icon in the system tray, and select your device.

• For Mac computers, drag the volume icon to the trash.

2

Disconnect the cable from your computer.

Data Fields

ACCURACY (GPS): The margin of error for your exact location.

For example, your GPS location is accurate to within +/- 12

feet (3.65 m).

AIRTEMP (temperature): The temperature of the air. Your

body temperature affects the temperature sensor.

AMB PRESS (ambient pressure): The uncalibrated

environmental pressure.

ASCENT (ascent total): The total elevation distance ascended

since the last reset.

AVG ASCENT (average ascent): The average vertical distance

of ascent since the last reset.

AVG DESCNT (average descent): The average vertical

distance of descent since the last reset.

AVG SPEED (average speed overall): The average speed

while moving and stopped since the last reset.

BAROMETER (barometer pressure): The calibrated current

pressure.

BATTERY: The remaining battery power.
BEARING: The direction from your current location to a

destination. You must be navigating for this data to appear.

COG (course over ground): The actual direction of travel,

regardless of the course steered and temporary variations in

heading.

COMPASS: A visual representation of the direction in which the

device is pointing.

COURSE: The direction from your starting location to a

destination. Course can be viewed as a planned or set route.

You must be navigating for this data to appear.

CRRCTD HDG (corrected heading): The heading based on

your direction of travel. If you are not moving, the corrected

heading is the compass heading.

CTS (course to steer): The direction in which you must steer to

return to the course set at start of navigation.

DATE: The current day, month, and year.
DESCENT (descent total): The total elevation distance

descended since the last reset.

DISTANCE (trip odometer): A running tally of the distance

traveled since the last reset.

12

Device Information

Advertising