Garmin GPSMAP 172C - Manual (Page 67)

Main Menu:
GPS Tab Options
The Differential SNR (Signal to Noise Ratio) indicates, on a scale to 0-30db with 30db being the
best, the strength of the DGPS signal being received. The SNR depends upon the mounting of your
DGPS receiver and the distance from the DGPS transmitting station.
The GPS Info tab features an options menu that provides access to functions and features relating
to the GPS Info display.
The following options are available by pressing MENU on the GPS Info Tab of the Main Menu:
• Start/Stop Simulator— toggles the unit simulator on or off. Retail Demo mode restores factory
settings to the unit if left unattended for over two minutes. This mode should only be used for
display purposes. User waypoints are NOT deleted.
• WAAS On/WAAS Off— toggles the WAAS capability of the receiver on or off.
• Track Up/North Up— allows you to select between a north up or track up sky view display for
the GPS Info display only.
• AutoLocate— allows the receiver to locate your position automatically. This process can take up
to five minutes.
• Initialize Position— allows you to initialize the receiver graphically on the Map Page to initially
help the receiver acquire more quickly. See page 4 for instructions on initialization.
• Set 2D Elevation— allows you to manually enter the elevation when in 2D or Simulator mode
only. Any elevation entered is automatically calculated when the GPS is in 3D mode.
To select a menu option:
1. Using the ARROW KEYPAD, highlight the desired option and press ENTER.
NOTE: If a DGPS recever s attached to the unt and Garmn DGPS, RTCM In/NMEA
Out, or Other DGPS s enable on Port , WAAS s automatcally dsabled (WAAS Off). It
s not possble for the GPSMAP /C to receve WAAS and DGPS correctons at the
same tme. F
GPS Tab Options Menu

Reference