User waypoints – Garmin GPSMAP 3010C User Manual
Page 27
GPSMAP 3006C/3010C Owner’s Manual
1
b
asIc
o
PeratIon
>
r
evIewIng
and
e
dItIng
w
aYPoInts
b
as
Ic
o
pera
tI
on
User Waypoints
The User sub tab on the Points tab shows a master list of all waypoints currently
stored in memory. From the User sub tab, you can review, edit, rename, or delete
individual waypoints, or delete all user waypoints. The number of available and
used waypoints is shown at the bottom of the User sub tab. Stored waypoints are
arranged in alphanumeric order.
To scroll through and review the waypoint list:
1. Use the
ROCKER to highlight the Points tab on the Main Menu, and then
highlight the
User sub tab.
2. Press up or down on the
ROCKER to scroll through the list of waypoints;
press right or left on the
ROCKER to scroll by page.
3. Press
ENTER to review the highlighted waypoint on the Review Waypoint
for information on reviewing and editing waypoints.
4. Press the
Next soft key to return to the waypoint list. The next waypoint in
the list is automatically highlighted.
Deleting Waypoints
The following soft keys are available when you highlight a waypoint on the User
sub tab:
•
New Waypoint—creates a new waypoint.
• Delete—deletes the selected waypoint from the list and from any route in
which the waypoint was used.
• Del by Smbl—deletes waypoints that use the same symbol.
• Delete All—deletes all waypoints from the unit.
NOtE: When you delete a waypoint from the list, it cannot be recovered from
the unit. Save important waypoints to a data card, or write them down.
To delete a single waypoint from the User sub tab:
1. Use the
ROCKER to highlight the waypoint you want to delete, and then
press the
Delete Waypoint soft key. A confirmation message appears.
2. Highlight
OK, and press ENTER to delete the selected waypoint.
To delete waypoints by symbol:
1. On the
User sub tab, highlight the waypoint you want to delete.
2. Press the
Delete By Symbol soft key.
3. Use the
ROCKER to highlight the symbol of the waypoints you want to
delete, and press
ENTER.
4. Highlight
OK, and press ENTER to delete the waypoints by symbol.
Otherwise, highlight
Cancel, and press ENTER to return to the User sub
tab without deleting any waypoints.
To delete all user waypoints:
1. On the
User sub tab, press the Delete All soft key.
2. Highlight
OK, and press ENTER to delete all user waypoints.