Cube – Land of Nod Cube Collection 3 Cube Bench User Manual
Page 2
CUBE
3-CUBE BENCH
Made in Thailand - r07
Page 2 of 4
Customer Service
800.933.9904 | Latest instructions available at www.landofnod.com
4
2
3
5
A. Insert 1
cam into each partition as shown.
Make sure arrow of cam points toward nearest
edge with holes.
B. Insert 4
wood dowels into each side panel as
shown.
A) Insert 2
wood dowels into assembled unit
as shown.
B) Fit dowels into corresponding holes of
support as shown. Secure with 2 large screws
as shown.
With the assistance of another adult, fit dowels of
bottom panel into corresponding holes of
assembled unit. Secure, with 4
large screws as
shown
using a screwdriver. Do not over tighten the
screws.
Fit dowels of
top panel into corresponding holes of
partitions as shown. Using a screwdriver, turn
each
cam until it securely engages the cam screw.
partition
side panel
top
panel
A
B
bottom
panel
support
partition
NOTE: Make sure arrow
points toward nearest
edge with holes
NOTE: Do not over
tighten the screws
A
B