Vitek VT-3539 - Manual (Page 9)

ENGLISH
9
• If there is not humidity data available for channel 1, cloudy weather will always be
indicated, although snow and black ice warnings will continue to be displayed.
TEMPERATURE ALARM SETTINGS
The temperature alarm function allows you to program the audible alarms if the tem-
perature becomes higher or lower than a preset setting.
High temperature alarm
1 Use the Mode/Snooze button to choose
the High temperature mode, the
symbol
will appear on the display.
2 Use the Channel button to choose the
channel (indoor, channel 1, channel 2, chan-
nel 3 or channel 4)
3 Press the Hour/+/Max or Minute/-/Min
buttons to set the desired temperature.
4 Press the Mode/Snooze button to save
the settings.
Low temperature alarm
1 Use the Mode/Snooze button to choose
the Low temperature mode, the
symbol
will appear on the display.
2 Use the Channel button to choose the
channel (indoor, channel 1, channel 2, chan-
nel 3 or channel 4)
3 Press the Hour/+/Max or Minute/-/Min
buttons to set the desired temperature.
4 Press the Mode/Snooze button to save
the settings.
When the alarm will be heard
• When a low temperature or high temperature signal is detected on the pre-deter-
mined channel, the display will show the or symbol.
• When the alarm is activated, the display will show the channel giving the alarm and
the or symbol will blink (depending upon the type of alarm – low or high tem-
perature). Press ANY button to deactivate the alarm.
35391.indd 9 35391.indd 9 23.05.2006 17:08:52 23.05.2006 17:08:52