Veris Verabar V200 Spec Sheet - Manual (Page 2)

Vera
bar ®
Vera
bar
Flow Calculation Program Flow Calculation Program
5.
Flow Calculation
All Verabar applications require a flow calculation to verify
the DP, pressure and temperature limits, structural limits
and to size the transmitter. The Veracalc PC Program
is for use by representatives and end users. It is easy
to operate and includes steam tables.
Synchro-Drive Description
• Designed for pressures greater than ANSI Class 150#, Synchro-Drive
is equipped with two drive rods that are coupled together by a
protected chain drive system. Turning either drive nut simultaneously
rotates both rods.
Synchro-Drive Benefits
• 95% faster and easier insertion and retraction.
• Equal load distribution over both rods maintains sensor alignment
and eliminates binding.
* U.S. Patent 5,410,920
V200S (Single Rod)
V200D (Double Rod)
Verabar
®
Hot Tap Models
Synchro-Drive
(Option SYN)
Drive nut
Drive chain
Drive rod
Anti-seize
orbital
bearing
Instrument
head (SS)
Anti-seize
orbital bearing
Packing gland
(SS)
Access nipple
(SS)
Access valve
(CS, SS or
BRZ)
Weld coupling
(CS) (SS-opt)
Close nipple
(SS)
Sensor (316SS)
V200D
only
Screw drive
(threaded
rod-SS)
Protective
chain shroud
4.
Select Model from Page 3
Use the Ordering Information table on Page 3 to determine your
model number.
Short
Straight Run
Consult Factory
(V) Vertical
(H) Horizontal
Pipe Size _____ Sch _____
Pipe ID _____ and
Wall _____ Pipe Mat’l _____
Wall
Height (H) _____
Width (W) _____
Wall _____
Duct Mat’l _____
Dimension
Verabar spans
(H) or (W)
Fluid Name: Maximum Normal Minimum Units
Flow Rate
All
Temperature @ Flow
Fluids
Pressure @ Flow
Gas
Specific Gravity, or
Molecular Weight
Liquid Specific Gravity
Steam Veracalc Program can calculate Density from Temperature and Pressure
ID
W
H
2.
Pipe or Duct Orientation
3.
Enter Flow Conditions
1.
Enter Pipe Dimensions or Duct Dimensions
Furnish the following information: