Vutec RPL-02 - Installation Instructions - Manual (Page 3)

2
Figure 1a Figure 1b
The removable steel cage that attached to the traveling platform may be removed and replaced
with user custom cabinet. Referring to Figure 2, tabletop over-hangs and end returns, if any,
should be kept to a minimum to avoid possible interference with the projector light beam. Be
sure that the total weight of the tabletop and the projector must not exceed the specified
maximum lifting capacity.
Warning:
To prevent crushing of hands or objects; the tabletop must not be screwed to the removable
steel cage or custom cabinet. It must lies on top and locates by Dowel pins to determine its
position.
Figure 2
Mounting holes for #8 screws are placed along the frame’s four vertical angles. If there is needs
for other mounting preferences, do so as long as mounting objects do not interfere with lift’s
internal moving parts.