VIEWSONIC VPC190 - Manual (Page 20)

Installation
ViewSonic VPC190 11
Connecting a USB Mouse
Plug the mouse’s cable into the USB port of the All-in-One PC.
Connecting the Power
1. Connect the power adapter to the power jack of the All-in-One PC.
2. Connect the power cord to the power adapter.
3. Plug the power cord into an electrical outlet.
NOTE
When disconnecting the power, always unplug the power cord from the electrical
outlet first. Use the cord’s head to unplug, never pull the cable.
SD/MMC/MS
SD/MMC/MS