Velleman VDP1500ASM - Manual (Page 4)

VDP1500ASM Rev. 01
01/09/2010 ©Velleman nv
4
output socket of the last device in the chain.
• Start Address Setting
All DMX-controlled devices need a digital start address so that the correct device responds to
the signals. This start address is the channel number from which the device starts to “listen” to
the DMX controller. Enter the correct number and read it from the display located on the base
of the VDP1500ASM.
You can use the same starting address for a whole group of devices or enter an individual one
for every device.
When all devices have the same address, all the VDP1500ASMs will “listen” to the control
signal on one particular channel. In other words: changing the settings of one channel will
affect all devices simultaneously. If you set different addresses, each device will “listen” to a
separate channel number. Changing the settings of one channel will only affect the device in
question.
In the case of the 1-channel VDP1500ASM, you will have to set the start address of the first
VDP1500ASM to 1, the second VDP1500ASM to 2 (1 + 1), the third to 3 (2 + 1) and so on.
• DMX512 Setting
This smoke machine is controlled via 1 DMX channel. Set the DMX
address using the DIP switches. The example shows a smoke machine
with its DMX address set as 19.
6. Cleaning and Maintenance
• All screws should be tightened and free of corrosion.
• The housing, visible parts, mounting supports and the installation location (e.g. ceiling,
suspension, trussing) should not be deformed, modified or tampered with e.g. do not drill extra
holes in mounting supports, do not change the location of the connections.
• Moving mechanic parts must not show any signs of wear and tear.
• The electric power supply cables must not show any damage. Have a qualified technician
maintain the device.
• Disconnect the device from the mains prior to maintenance activities.
• Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
• There are no user-serviceable parts apart from the fuse.
• Contact your dealer for spare parts if necessary.
7. Technical specifications
Power Supply max. 230VAC / 50Hz
Power Consumption max. 1500W
Fuse 10A, 250VAC (5 x 20mm) (order code FF10N)
Warm-Up Time 9 minutes
Smoke Output ± 560m³/min
Tank Capacity 5l
Dimensions 540 x 256 x 231mm
Total Weight 15kg
Smoke Liquid pro high-density smoke liquid (5l, order code VDLSLHT5, not incl.), high-
density smoke liquid (5l, order code VDLSLH5, not incl.) or standard smoke
liquid (5l, order code VDLSL5, not incl.)
Cleaning Liquid smoke machine cleaning liquid (0.25l, order code VDLCL, not incl.)
Use this device with original accessories only. Velleman nv cannot be held responsible in
the event of damage or injury resulted from (incorrect) use of this device.
For more info concerning this product and the latest version of this user manual, please
visit our website www.velleman.eu .
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman Components nv. All worldwide rights reserved.
No part of this manual or may be copied, reproduced, translated or reduced to any electronic medium or otherwise without
the prior written consent of the copyright holder.