Velleman SSE052 - Manual (Page 4)

SSE052 PEREL 4
6. Programming Your Own Code
REMARK: The safe can be programmed with two sets of codes. After first opening and battery installation, program
two sets of codes overwriting the factory codes.
Programming the User Code
• Open the door and press the RED button (b) (located on the inside of the door near
the hinge). The display (e) will show “SET CodE”.
• Enter your code consisting of 3 to 8 figures. Confirm your code by pressing START.
• You will hear a sound and see “IN” and your code on the display (e), meaning the
code has been accepted.
Programming the Master Code
• Press the RED button (b) (located on the inside of the door near the hinge) and press START. The display will
show “oLd CodE”.
• Enter the original master code (“8888”) and press START. The display (e) will show “SET”.
• Enter your personal master code consisting of 3 to 8 figures and confirm by pressing START. The display (e) will
show “rE-InPUT”.
• Re-enter your master code and confirm by pressing START.
• You will hear a sound and see “IN” and your code on the display (e), meaning the code has been accepted.
If an incorrect code has been entered, a red LED (g) will light and you will see “Error” on the display (e). If an
incorrect code has been entered 4 times consecutively, the display (e) will show “Error” and buzz for 3 minutes. The
correct code cannot be entered during those 3 minutes. However, the door can be opened using the override keys.
To deactivate the buzzer (h), press the RED button (b) located on the inside of the door near the hinge.
If you do not want the display to show the code when opening the door, press START twice before entering the code.
7. Overriding Instructions
Your SSE052 can be overridden using the included key.
• Remove the plastic cover (d) on the front of the safe and insert the key into the lock.
• Turn the key in an anticlockwise direction and turn the rotary knob (a) in a clockwise direction. Open the door.
8. Installing the Safe
To reduce the risk of theft, the safe can be secured to the floor, wall or in a cupboard. For your convenience, there
are 2 holes (Ø 8mm). Fix the safe by the supplied expansion bolts. Install the safe in a horizontal position on a solid
and secure surface.
9. Technical Specifications
Power Supply 4 x 1.5V AA batteries (incl.)
Dimensions
Interior 510 x 310 x 340mm
Exterior 520 x 360 x 350mm
Total Weight 22kg
The information in this manual is subject to change without prior notice.