Velleman HAA54 - Manual (Page 7)

HAA54 GB 7
8. Specifications
Current consumption
: 15mA typical at 12VDC
Operating Voltage : 9-16VDC, 12VDC nominal
Detection Method : PIR detection with changing polarity, “Double –Twin
Optics” system
Warm-up Delay : 2 minutes typical, with flashing LED indication
Alarm Activation Delay : 2-3 seconds
Alarm Output : N.C. relay contact with a 10
Ω resistor in series. Contact
rating : 28VDC, 0.1A
Walk-Test LEDs : For the upper and lower channels and for the alarm
indicators. Can be armed or disarmed at will
Pulse Counter : Normal response or 2 pulses within 12 seconds in the
“HARSH”-position
Tamper Switch : N.C. contact with a 10
Ω resistor in series. Contact rating
: 12VDC, 50mA
Operating Temperature : -10 to +55°C with temperature compensation
Humidity : 95% non-condensing
EMC (electromagnetic compatibility) : conform to CE-label standards
Dimensions
: 64 (W) x 45 (H) x 127 (L) mm
--------------------------
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its
lifecycle could harm the environment. Do not dispose of the unit (or batteries) as
unsorted municipal waste; it should be taken to a specialized company for recycling.
This device should be returned to your distributor or to a local recycling service. Respect
the local environmental rules.
If in doubt, contact your local waste disposal authorities.