Velleman CFAN0245S User Manual

Page 5

Advertising
background image

CFAN0245S

08.12.2010

©Velleman nv

5

5. Overview

Refer to the illustrations on page 2 of this manual.

1 front grille

8 head mounting screws

2 fan blade

9 locking knob

3 rear grille

10 telescopic pole

4 brace

11 base

5 motor assembly

12 base weight

6 control buttons

13 metal ring

7 power cord

14 base locking bolt

6. Mounting instructions

Refer to the illustrations on page 2 of this manual.
Note: Never use the fan without the safety grill in place.

Place the telescopic pole [10] in the base [11].

Turn the base upside down and install the base weight [12].

Slide the metal ring [13] over the base locking bolt [14] and secure the base to the telescopic pole.

Place the fan assembly on top of the telescopic pole [10] and secure it with two bolts and nuts.

7. Operating instructions

Refer to the illustrations on page 2 of this manual.

Place the fan on a flat and sturdy surface. Make sure no objects (e.g. curtains) can be sucked into

the rear of the fan.

Insert the power plug [7] into the mains.

Adjust the tilt angle by pushing the grille.

To adjust the height, hold the fan assembly and release the locking knob [9]. Slide the fan assembly

to the desired height and secure with the locking knob [9].

Set the desired output speed via the control buttons [6]:

0…STOP 1…LOW 2…MEDIUM 3…HIGH

Always switch off the fan before moving it.

Switch off and unplug from the mains after use.

8. Cleaning and maintenance

Disconnect the device from the mains prior to maintenance activities.

Clean out the parts with a soft and dry cloth. Remove stains with a damp cloth and some mild soap.

Remove soap remnants with the damp cloth. Do not use abrasives.

Make sure no water or any other liquid enters the motor assembly [5] or the control buttons [6].

Keep the ventilation holes of the motor assembly [5] free from dust at all times.

9. Technical specifications

power 170W
Ø fan

45cm

airflow

speed 1

14.4m/s

speed 2

16.8m/s

speed 3

25.9m/s

height 130cm
weight 9350g
vertical oscillation arc

130°

power supply

230Vac/50Hz

max. ambient temp

50°C

power cord length

1.8m

Use this device with original accessories only. Velleman nv cannot be held responsible in the

event of damage or injury resulted from (incorrect) use of this device. For more info

concerning this product and the latest version of this user manual, please visit our website

www.perel.eu. The information in this manual is subject to change without prior notice.

Advertising