How to proceed in protection mode – TC Electronic BG250 User Manual
Page 21
Advertising
Protection mode
17
How to proceed in Protection mode
■ If the amplifier does not automatically recover from
Protection mode and feels hot, try turning off the
amplifier for a minute to let it cool. Ensure sufficient
ventilation.
■ Ensure that your speaker cable is not defect, as
such a defect could cause a short circuit.
■ Turn on the amplifier again.
If these steps do not solve the problem and the Tuner
LEDs continue flashing, you will have to send the ampli-
fier to a qualified service center for inspection.
Advertising