Prokit's Industries MT-7050N User Manual
Mt-7050n fiber continuity tester user manual
MT-7050N Fiber Continuity Tester User Manual
MT-7050N is a simple and user friendly fiber tester with extremely Krypton light,
easy operation and more safety than laser light source.
Features:
Comes with wrist strap for drop prevention.
Rugged, compact, and splash proof metal housing
Support 2.5 mm Connect (for FC/SC/ST)
The button switch permits easy one handed operation
Powerful Krypton light source provides long range over multimode fiber.
Operates on 2 AA batteries (not included)
Operation:
Make sure the fiber connection is in place.
Press the button of the end of tester for light on.
Check the light can be see from the other terminal.
Press button again, the light will be shut off.
Battery Replacement:
Always make sure the battery conditions.
Unscrew the cap of the end of tester, then insert two AA size batteries, the
cathode of battery should facing the spring of cap. Then screw the cap.
©2012 Copyright by Prokit’s Industries Co., Ltd.