Factory Direct Hardware LCN 4642 - Manual (Page 4)

LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100 PHONE 800-526-2400
FAX 800-248-1460
www.lcn.ingersollrand.com
8/07
50
INSTALLATION ACCESSORIES
SWITCH END CAP, 4640-334
End cap (black powder coat only) with cut outs for installing
on/off and hold open switches.
BLANK END CAP, 4640-334-2
Black power coat only.
SWITCH END CAP, 4640-334CS
End cap and switch (black powder coat only) for concealed
switch option.
ON/OFF SWITCH ASSEMBLY, 4640-3179-1
Red rocker switch. Plugs into high voltage PC board.
HOLD-OPEN SWITCH ASSEMBLY, 4640-3179-2
Black rocker switch. Plug into low voltage PC board.
PC BOARD ASSEMBLY, 4640-3180
High and low voltage PC boards connected to mounting
bracket.
MOTOR/CLUTCH ASSEMBLY, 4640-3454
A geared assembly in an LCN power operator that
incorporates a “no destruct” feature.
CONTROL BOX ASSEMBLY, 4640-3462
Digital controller with built-in 12/24 VDC power supply.
Programming and timing functions are adjusted on controller.
AC POWER CABLE, 4640-3498-2
2 wire cable to connect 120 VAC from PC board assembly to
controller.
RIBBON CABLE CONNECTOR, 4640-3498-1
16 wire ribbon cable connecting 1-24 pin terminal connectors
to controller.
334
334-2
334CS
3179-1
3179-2
3180
3498-2
3498-1
3454
3462
AC
CE
SS
OR
IE
S
LCN 4640 SERIES