QTech Data Systems Multi Point Controller (MPC) System - Manual (Page 9)

QTech Multi Point Controller for WP2P - Quick Start Guide – v1 – August 2012 9
www.qtech.co.nz Tel: 03 3663713
Aerial Notes
The reliability of all radio products is dependent on good line of sight & signal
strength.
The supplied stub aerial (P/N PD9230) should be suitable for ranges of up to 350m
and where the Controller is in a non-conductive enclosure (plastic etc).
Optional alternative externally mounting aerials are available from QTech.
Note – If the Controller is to be enclosed in a metal cabinet an optional
external aerial will be required.
Note – Do not cut or join the coax cable, this will increase losses and
impact reliability.