Asus RT-N12 - Manual (Page 15)

15 Chapter : Setting up the hardware RT-N1
Setting up the wireless router in Repeater mode
In the Repeater mode, the wireless router extends your wireless network coverage
and provides you with higher quality wireless radio signal. The NAT, firewall, and IP
sharing services are disabled.
To set up the wireless router in Repeater mode:
1. Choose the Repeater mode.
Router AP
Repeater RT-N12
. Connect your devices.
RT-N12
Client
Modem
Wireless Router
Note: We recommend that you use an Ethernet cable (wired connection) to connect your
computer to the wireless router for initial configuration to avoid possible setup problems due to
wireless uncertainty.