Asus M2N68-AM SE - Manual (Page 18)

3. Keyboard/mouse power (3-pin PS2_USBPW1-4)
This jumper allows you to enable or disable the keyboard/mouse and USB port 1-4
wake-up feature. When you set this jumper to pins 2-3 (+5VSB), you can wake up the
computer by pressing a key on the keyboard (the default is the Space Bar), clicking
the mouse, or using a USB device. This feature requires an ATX power supply that can
supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. The
PS2_USBPW1-4 jumper is for the rear USB ports.
M2N68-AM SE
M2N68-AM SE Keyboard/mouse power
2
1 2
3
+5V
(Default)
+5VSB
PS2_USBPW1-4
1.7 Connectors
1.7.1 Rear panel ports
1. PS/2 Mouse port. This port is for a PS/2 mouse.
2. LAN (RJ-45) port. This port allows 10/100 PHY connection to a Local Area Network
(LAN) through a network hub.
LED (Orange) LED (green)
Status
Description Status Description
OFF No link OFF No link
ORANGE 100Mbps connection GREEN 10Mbps connection
3 4 2
5 7 6 9 8
1
10
LAN port LED indications
LAN port
LED
(Green)
LED
(Orange)
Chapter 1: Product introduction 1-9