Asus DSBV-D - Manual (Page 86)

- Chapter 4: BIOS setup
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
ESC Exit →← Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
Select ‘Yes’ if you want
to clear the Extended
System Configuration Data
(ESCD) area.
PCI Configuration
Reset Configuration Data [No]
Plug & Play OS [No]
Palette Snooping [Disabled]
PCI Device, Slot #1
PCI Device, Slot #2
PCI Device, Slot #3
PCI Device, Slot #4
PCI Device, Slot #5
PCI Device, Slot #6
PhoenixBIOS Setup Utility
Advanced
4.4.3 PCI Configuration
This menu shows the PCI configuration settings. Select an item then press <Enter>
to display the configuration options.
Reset Configuration Data [No]
This item allows you to clear the Extended System Configuration Data (ESCD)
area. Configuration options: [No] [Yes]
Plug & Play O/S [No]
When set to [No], BIOS configures all the devices in the system. When set to
[Yes] and if you install a Plug and Play operating system, the operating system
configures the Plug and Play devices not required for boot.
Configuration options: [No] [Yes]
Palette Snooping [Disabled]
When set to [Enabled], the palette snooping feature informs the PCI devices that
an ISA graphics device is installed in the system so that the latter can function
correctly. Configuration options: [Disabled] [Enabled]