Asus P5Q SE/R - Manual (Page 90)

4-26 Chapter 4: BIOS setup
4.5.4 OnBoard Devices Configuration
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
Onboard Device Configuraiton
High Definition Audio [Enabled]
Front Panel Type [HD Audio]
SPDIF_OUT Mode Setting [SPDIF Output]
Marvell IDE Controller [Enabled]
Onboard PCIE GbE LAN [Enabled]
LAN Option ROM [Disabled]
Serial Port1 Address [3F8/IRQ4]
Enable or Disable
High Definition Audio
Controller
High Definition Audio [Enabled]
Allows you to enable or disable the High Definition Audio. The following item
appears only when you enable this item. Configuration options: [Enabled]
[Disabled]
Front Panel Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy
AC’97 or high-definition audio depending on the audio standard that the front
panel audio module supports. Configuration options: [AC97] [HD Audio]
SPDIF_OUT Mode Setting [SPDIF Output]
Allows you to select SPDIF_OUT mode. Configuration options: [HDMI
Output] [SPDIF Output]
Marvell IDE Controller [Enabled]
Allows you to disable or enable the onboard Marvell ® IDE controller.
Configuration options: [Enabled] [Disabled]
Onboard PCIE GbE LAN [Enabled]
Allows you to enable or disable the onboard PCIE GbE LAN.
Configuration options: [Enabled] [Disabled]
LAN Option ROM [Disabled]
This item appears only when you enable the previous item.
Configuration options: [Disabled] [Enabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
BIOS SETUP UTILITY
Advanced