Asus DSL-N10S - Manual (Page 35)

35 Chapter 4: Configuring via the web GUI DSL-N10S
Configure the MAC filter settings
The MAC Filter page allows you to restrict certain types of outgoing or incoming
data packets from or to network clients based on their MAC addresses.
To configure the MAC filter settings:
Click Internet Services > Firewall tab > MAC Filter.
In the Direction field, select Outgoing or Incoming.
In the Source MAC address field, key in the MAC address of the network
client where the data packets will be coming from.
In the Destination MAC address field, key in the MAC address of the
network client where the data packets will be going to.
Click Add to add the MAC filter settings to the Current MAC Filter table.
1.
.
3.
4.
5.
Note: If you want to restrict access to all outgoing or incoming data packets from or to network
clients, select Deny or Allow in the Outgoing Default Policy or Incoming Default Policy field.