Asus M2N68-AM - Manual (Page 58)

2-20 Chapter 2: BIOS setup
2.6 Boot menu
The Boot menu items allow you to change the system boot options. Select an item then press
<Enter> to display the sub-menu.
Specifies the Boot
Device Priority
sequence.
A virtual floopy disk
drive (Floppy Drive
B:) may appear when
you set the CD-ROM
drive as the first
boot device.
Boot Settings
Boot Device Priority
Boot Settings Configuration
Security
2.6.1 Boot Device Priority
1st ~ xxth Boot Device [1st Floppy Drive]
These items specify the boot device priority sequence from the available devices. The
number of device items that appears on the screen depends on the number of devices
installed in the system. Configuration options: [xxth Drive] [Hard Drive] [ATAPI CD-ROM ]
[Disabled]
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
2.6.2 Boot Settings Configuration
Quick Boot [Enabled]
Enabling this item allows the BIOS to skip some power on self tests (POST) while booting to
decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the
POST items. Configuration options: [Disabled] [Enabled]
Full Screen Logo [Enabled]
This allows you to enable or disable the full screen logo display feature. Configuration
options: [Disabled] [Enabled]
Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.