Asus T12Ug - Manual (Page 59)

Appendix
A
Software Problem - BIOS
Updating the BIOS.
1. Please verify the Notebook PC’s exact model and download the latest BIOS file for your model
from the website.
2. Use the “WINFLASH” utility to update your BIOS. The utility can be found in your Driver &
Utility CD that came with your Notebook PC.
3. Extract the BIOS file to a temporary location (such as the root in C:\)
4. Click Start and find the WINFLASH link.
a. Select the new BIOS image file.
b. Confirm the selected BIOS information. Check the model, version, and data.
c. Click Flash to initialize the BIOS updating procedure.
d. Click Exit when procedure completes.
e. Reboot the system. Assuming that you have successfully flashed the BIOS file, press [F2] to
enter BIOS setup page when the logo appears during system boot-up.
f. After entering BIOS setup page, go to Exit page and choose Load Manufacture Defaults.
Then select Save and Exit and reboot the system again.
g. The BIOS flash procedure is now complete.
You can also use the “Easy Flash” function
on the Advanced page of the BIOS Setup
Utility� Follow the instructions shown�
You must “Load Manufacture Defaults” after
updating (flashing) the BIOS.
Common Problems and Solutions (Cont.)