Asus P/I-P65UP8/CP6ND - Manual (Page 37)

ASUS P/I-P65UP8 User’s Manual 37
IV. VGA Installation
Windows NT 4.0 Video Driver Installation
(Windows NT 4.0)
IV
. VGA
Installation
1. Boot Windows NT in standard VGA mode (recommended).
2. Run Windows NT Display program located in the Control Panel, under Set-
tings in the Start menu. Alternatively, position the cursor on the background of
the desktop, click the right mouse button, then select Properties from the popup
menu.
3. Select the Settings page.
4. Select Display Type...
5. Select Change... from the display options.
6. Select Have Disk...
7. Windows NT will prompt you for the correct path, enter the path of driver in
CD-ROM such as D:\VGA\NT40 (assuming your CD-ROM drive is letter D).
8. A list of ASUS S3 series video adapters will be displayed. Select the one you
are using, then click on the OK button.
9. Windows NT will once again prompt for confirmation. All appropriate files are
then copied to the hard disk.
10. Select Apply in Control Panel. Restart Windows NT. Windows NT will start
up using the S3 drivers.
11. Windows NT will boot into a default mode and start the Display applet allowing
for mode selection.