Asus WL-AM602 - Manual (Page 26)

WL-AM602 Combo Router User Manual
24
LAN USB ACT STATUS POWER
5. Check if the settings are right. Click Save to save the new settings.
6. Click Finish.
A DSL Router Reboot screen appears. The router reboots to activate the new settings.
LAN
Configure the DSL Router IP address and Subnet Mask. If you want the DHCP server
to automatically assign IP addresses, then select Enable DHCP Server and enter the
range of IP addresses that the DHCP server can assign to your computers. Select
Disable DHCP Server if you would like to manually assign IP addresses. Click Next to
continue. The Save button only saves the LAN configuration data, but does not apply
the configurations. Click Save/Reboot to save and activate the new settings.