Asus KFSN4-DRE/SAS - Manual (Page 100)

5-6 Chapter 5: RAID configuration
5.2.3 Rebuilding a RAID set
To rebuild a RAID set:
1. From the Array List, use the up or down arrow keys to select the RAID set
you want to rebuild, then press <Enter>. The RAID set details appear.
2. Press <R>.
3. Use the up or down arrow keys to select a the RAID set you want to rebuild,
then press <F7>. A confirmation message appears.
4. Press <Enter> to start rebuilding the
array, or <Esc> to cancel. The Array
List screen displays the RAID set
after rebuilding.
[Ctrl-X]Exit [↑↓]Select [B]Set Boot [N]New Array [ENTER]Detail
NVIDIA RAID Utility Mar 23 2006
- Array List -
Boot Id Status Vendor Array Model Name
Yes 2 Healthy NVIDIA STRIPING XXX.XXG
Yes 2 Healthy NVIDIA MIRRORING XXX.XXG
Rebuild array?
[Enter] OK [Esc] Cancel
[↑↓] Select [F6] Back [F7] Finish
Array 1 : NVIDIA MIRROR XXX.XXG
- Array Detail -
RAID Mode: Striping
Striping Width: 1 Striping Block: 64K
Adapt Channel M/S Index Disk Model Name Capacity
2 1 Master 0 XXXXXXXXXXXXXXXXX XXX.XXGB
1 0 Master 1 XXXXXXXXXXXXXXXXX XXX.XXGB