Asus W90V - Manual (Page 69)

Appendix
A
A-
System BIOS Settings (cont.)
RAID Function Support (on selected model)
For models that support RAID function, you must set the RAID item in the BIOS Setup before you can
create a RAID set from the built-in hard disk drives.
WARNING! Building a RAID set will clear all your data on both the primary disk drive
and the secondary disk drive, including Express Gate. Ensure that you’ve made a
backup before creating a RAID set.
The recovery partition will be deleted after you create a RAID set. You can only install
the system OS with a retail OS disc.
Only models with two hard disk drives may support this RAID function and the hard-
ware supports RAID 0 only.
IMPORTANT! Select “Reset Disks to Non-RAID” to reset the hard disk drive if you
want to set SATA Operation Mode to [Enhanced] in BIOS or use the hard disk in other
computers, otherwise the hard disk drive will not function normally.
IMPORTANT! If you want to reset the hard disk drive to NON-RAID, remember to re-
move the optional secondary hard disk drive before installing OS and drivers on your
notebook PC.
IMPORTANT! After you build a RAID set
on your Notebook PC, DO NOT select
Load Driver before installing OS on your
notebook PC.